C2 Dura Seal 20L

C2 DuraSeal – 20 Litre

$701.40 EX GST

C2 DuraSeal – 20 Litre

C2 Dura Seal™ is a durable, nonyellowing, protective coating that dramatically increases the stain resistance of exterior concrete paving. Ideal for steel- troweled, broomed or stamped concrete, C2 Dura Seal™ enhances the appearance of standard gray, chemically stained, integrally colored and colorhardened concrete.
Use C2 Dura Seal™ to protect new or existing concrete paving that is exposed to accidental spills of food or petroleum based products. It applies easily with pump-up sprayers, and dries within 60 minutes.

SKU: C2DS-20
    Produces a long-lasting, tough protective shine on any exterior concrete flatwork.
    Perfect for surfaces hardened and dust proofed with C2 Super Hard™ and C2 Hard™. Compatible with all C² lithium hardeners, densifiers, sealers and cleaners
    Adds depth and luster to colored concrete, including surfaces decorated with C2 Color Hard™ Protective Helps prevent problems related to water penetration of concrete

    Improves Maintenance
    Keeps soiling and contaminants from penetrating. Simplifies maintenance cleaning.

    Slip Resistant
    Treated surfaces maintain slip resistance. Slip resistance is not diminished with high gloss.
    UV stable. Will not yellow, discolor, peel or flake. May be applied to broom finished, steel troweled, or stamped concrete.
    Easy to Use 
    Fast drying. Most floors can be opened to traffic within four hours of treatment. Easy to apply. Easy to Use.
    Planet Safe
    C2 Dura Seal™ is water-based, nontoxic, no smell, non-flammable, complies with all known national, state and district AIM VOC regulations.

    Protect people, vehicles, property,
    plants and all nearby surfaces not
    to be treated from contact with the
    product including contact resulting
    from wind drift or overspray. Use
    polyethylene or other proven protective material to mask off all
    surrounding areas.
    C2 Dura Seal™ may be applied to
    new or existing concrete, cured
    concrete of any age. The application
    can begin as soon as prepared
    surfaces are clean and dry. Do not
    apply to surfaces, which are frozen,
    dirty or have standing water.
    Surfaces must be clean, dry and
    structurally sound. Remove all
    foreign materials including bond
    breakers, curing agents, surface
    grease and oil and construction
    Always prepare a test sample to
    ensure that the desired results are
    achieved on the specific substrate.

    Use a low-pressure sprayer. Do not
    Air and Surface Temperature
    Air and surface temperature should
    be 4ºC to 38ºC (40º F to 100º F).

    Do not dilute; apply as packaged. Use as specified. Mix well before use
    PLEASE NOTE: Coverage rates are offered for estimating purposes only. Variations in concrete quality, porosity, job site conditions, temperature and relative humidity will affect coverage rates and drying times.
    Broom Finished Concrete
    • 5-10 m2/L
    • 200-400 ft2/US gal
    Steel Troweled Concrete
    • 10-15 m2/L
    • 400-600 ft2/US gal
    Drying Time
    At 22ºC (72º F), 40%

    Relative Humidity, product dry times are:
    To Touch ½ – 1 hour
    Light Foot Traffic 4 hours
    Normal Traffic overnight
    Maximum Protection 7 days
    Application Instructions
    C2 Dura Seal™ may be applied on broomed, stamped or steel-troweled concrete. Cover surfaces uniformly, creating continuous film. 1. Use a clean pump-up sprayer fitted with a solid cone spray tip to spray-apply

    C2 Dura Seal™ in a continuous, circular motion. Work from one control joint to another. Maintain a wet
    edge. Avoid overlaps onto previously treated and dried surfaces. Use a soft bristle broom to move excess
    material from low spots.

    2. Allow to dry tack free, typically 20-60 minutes.
    3. Repeat steps 1–2 above as needed. Two coats provide maximum protection and shine.

    Under typical conditions, the surface is ready for light traffic within 4 hours of final application. Protect from water exposure for least 4 hours.

    Clean tools and equipment with fresh water before products dries. Immediately wash with fresh water
    over sprayed glass, aluminum, or other surfaces.


C2 DuraSeal – 20 Litre

Weight 45 kg
Dimensions 45 x 45 x 45 cm