A Barrel of C2 Maintenance 20L

C2 Maintenance – 20 Litre

$209.35 EX GST

C2 Maintenance – 20 Litre

  • A unique, proprietary concentrated lithium based cleaner.
  • Designed specifically for concrete floors treated with lithium hardeners.
  • Contains a lithium hardener-densifier that helps maintain concrete hardness.
  • Perfect for use on all indoor applications especially retail stores, warehouses and manufacturing plants to shopping malls, hospitals, schools and restaurants and many others.
  • Can be used as an effective maintenance cleaner for almost any concrete floor including concrete treated with sodium and potassium silicates.
SKU: C2M-20
  • C2 Maintenance is a maintenance cleaner specifically designed for concrete floors treated with lithium silicate hardening/densifying products. This specialized blend of degreasers and detergents removes most common soiling found on concrete floors. It is ideal for concrete floors everywhere, from warehouses and manufacturing plants to schools, stores, hospitals, restaurants and more.

    C2 Maintenance contains a lithium silicate hardener/ densifier to help maintain concrete hardness. During cleaning, the lithium silicate hardens any “soft” calcium hydroxide left over from the original hardening/densifying treatment or exposed by traffic or abrasion. Regular maintenance cleaning with C2 Maintenance as part of a comprehensive maintenance program ensures the highest appearance and performance standards for all indoor concrete flatwork. There is no better way to maintain Crete Colors hardened/densified floors.

     

    ADVANTAGES

    • Maintains concrete floor hardness and shine.

    • Removes most common soiling.

    • Flexible dilution for both surface and deep cleaning.

    • Readily biodegradable. Low toxicity.

    • Contains US EPA DfE (Designed for the Environment) conformant CleanGredients® listed surfactants.

    • Concentrated for economy of storage and transport.

    • No rinsing needed for routine surface cleaning of floors.

    • Available in convenient pre-measured 120ml packages for easy dilution.

    • Ideal for auto scrubbers.

    Limitations

    • May not remove some embedded stains.

    PREPARATION

    Sweep or vacuum to remove loose materials from the surface to be cleaned. Pre-clean oil spots or other deep stains with the appropriate Crete colors product.

    For recommendations, call contact us at sales@cretecolors.com

    Surface & Air Temperatures

    Cleaning effectiveness is reduced when surface and air temperatures fall below 10°C (50°F). Do not apply at temperatures below 4°C (40°F).

    Equipment

    Apply using a mop or automatic scrubber. Use soft brushes/pads with auto scrubbers. Never use aggressive brushes or pads on polished concrete.

    Storage & Handling

    Store in a cool, dry place. Always seal container after dispensing. Do not alter or mix with other chemicals. Published shelf life assumes upright storage of factory-sealed containers in a dry place.

    Maintain temperatures of 7–38°C (45–100°). Do not double stack pallets. Dispose of unused product and container in accordance with local regulations.

    Packaging

    120ml pax, 3.5L, 20L, or 200L containers

    APPLICATION

    Read “Preparation” and the Safety Data Sheet before use.

    ALWAYS TEST a small area of each surface to confirm suitability, coverage rate and desired results before beginning overall application. Test with the same equipment, recommended surface preparation and application procedures planned for general application.

    Let surface dry thoroughly before inspection.

    Dilution & Mixing

    Normal Cleaning: 120ml (pax) of C2 Maintenance concentrate per 10 liters of fresh water (4 fl oz. of C2 Maintenance concentrate per 2.5 gallons of fresh water).

    Deep Cleaning: 120ml (pax) of C2 Maintenance concentrate per 7.5 liters of fresh water (4 fl oz. of C2 Maintenance concentrate per 2 gallons of fresh water).

    Application Instructions

    1. Apply with a mop or automatic scrubber.

    2. After routine surface cleaning, rinsing the concrete floor is not necessary. Mop up spent cleaner and dissolved contaminants, or vacuum up with automatic scrubber. After deep-cleaning, or for cleaning in food processing areas, rinse well with fresh water. Do not let puddles or concentrated cleaner dry on the floor. Mop up rinse water, or vacuum up with automatic scrubber.

    3. Buff the cleaned floor with a white pad to increase the shine.

    Cleanup

    Clean tools and equipment with fresh water.

     

    BEST PRACTICES

    For spot cleaning heavily soiled areas, begin testing C2 Maintenance at a dilution of .5 L of cleaner to 10 liters of fresh water. Do not use dilutions stronger than .5 L of cleaner concentrate to 5 liters of fresh water. Always use the mildest effective dilution possible.

    To remove deeply embedded oil and grease stains, test C2 Degrease or C2 Stain Clean. Use soft brushes/pads with auto scrubbers.

    Never use aggressive brushes or pads on polished concrete. Use C2 Maintenance as part of a comprehensive maintenance program that includes daily cleaning with C2 Clean, and regular deep cleaning at least once a week.

     

     

C2 Maintenance – 20 Litre

Weight 45 kg
Dimensions 45 x 45 x 45 cm