Call Us 1800 422 992

Dust Separators

Dust Separators

Dust Separator Units

Our range of concrete and construction dust separators are designed to connect between your power tools, concrete floor grinder, scarifier, shotblaster or demolition equipment and vacuum to help capture the bulk of the dust before it gets through to the filters in your vacuum. Shop the range of dust separators including the popular 65L Supa Dust Separator to suit single-phase vacuums here.

Advantages of Using a Dust Separator

You can save time and money by adding a pre-separator to your single-stage dust collector. using this dust control equipment can save you time because emptying one of these is much easier than opening the lower, or "chip," bag of a bag-over-bag collector. It will save you money in the long run since the turbine will not be subjected to a constant onslaught of heavy chips or dangerous metal fragments such as the occasional screw or nail that falls to the floor. It will also allow your filter bags to perform what they were designed to do: filter dust rather than accumulate chips.

As the lower bag fills up, the filter surface area shrinks, and the filter bag's ability to filter efficiently diminishes. More blow-through with fewer filters and the same pressure. When a pre-separator is installed between the dust source and the collector, this happens at a considerably slower rate.

The heavy chips spin around the container's walls, losing momentum until they sink to the bottom, much like a cyclone dust separator. Lighter chips and dust are drawn up through the outlet port and caught by the filters in the dust collector.