Floor removal made so easy with our self-propelled floor lifter

Floor Lifting & RemovalLatest News

9 Feb 2016

Floor removal made so easy with our self-propelled floor lifter

Self Propelled floor stripperCould floor lifting & removal be any faster, easier or simpler?

We don't think so! Removing floor coverings is a breeze with a self-propelled floor lifting machine - like the RO-2 ROLL stripper.

When you're removing LVT (Luxury Vinyl Tile) flooring coverings from a concrete substrate or floor, you need a higher removal performance. Especially when the floor covering is extremely well bonded with a tacky adhesive.

SelfPropelled floor lifter RollRO2 webThat’s where the ROLL self-propelled floor lifting machine comes into its own.

Where other machines tend to slip over the floor covering in an effort to increase the removal pace, the ROLL lifting machine with its traction plates gained ground quickly.

Getting started with floor lifting

A small gap in the floor covering was enough to get started with removing it. No pre-cutting was needed, because there was no click connection between individual planks as it was fully bonded (direct stick).

Using the flat double bevelled blade the removal was underway quickly.

Floor lifting of vinylIn complete control with the self-propelled floor lifter

To ensure no damage was done to the flooring underneath, a flat bevelled blade was used to get in under the covering and bonding. The rubber elements on the wheels ensured the floor stripper could maintain a high removal speed as it moved across the floor.

The powerful 1.2kW motor gave a striking mechanism drive for the stripper tool with 2,500 beats per minute. Thanks to its quiet operation, the internal strip out of the floor covering in the make good – retail store could be done at any hour of the day, without disturbing the neighbouring businesses.

National Roll Floor lifterEasy transport to and from the job site

Standard transport tyres ensure the machine can be quickly moved to and from sites and in and around the job. When in action, these tyres can be removed to unleash the full potential of the chain tyres.

With a 250mm wide floor lifting blade, two planks could be removed in one pass.

This mean the floor removal and lifting project took just 4 hours to lift and remove 250mof LVT vinyl floor covering.

Want to know how you can speed up removal on your flooring projects?

  • How to lift floor coverings the best way?
  • To find out what's the most economical tool or machine to lift floor coverings?
  • How to remove floor coverings the easiest, fastest and most economical way possible?

It’s easy! Just talk to the trade team at All Preparation Equipment today on 1800 422 992.