Introducing new style dust shroud for controlling dust while cutting concrete, stone and construction material

all prep

8 Jun 2020

Introducing new style dust shroud for controlling dust while cutting concrete, stone and construction material

On demand is the AirDUSTER and AirCHASER dust shrouds designed to control dust from the source while you work. Designed with an aerodynamic grid these dust shrouds largely provide air induction to the cutting zone cooling the blade, increasing its lifetime and cutting speed. 

Due to the strong turbulent current your vacuum will control the dust while you work as the dust is forced through the shroud and driven directly to the vacuum dust extractor you connect to it.

As a universal fit, Australian contractors are loving this new design as an upgrade from most other conventional styles which have been available to date. These shroud covers can be purchased online at or talk to one of the All Preparation Equipment team on 1800 422 992 about your application and which shroud will suit best.

Since introuding these newer style dust control shrouds, casings and connections contractors have been taking advantage of effective ways to control dust onsite. 

  • Drilling concrete walls, floors, ceiling repairs 
  • Cutting concrete, masonry and tiles
  • Cutting stone, marble, and porcelain
  • Grinding concrete and stone floors and wall areas
  • Polishing concrete, stone and marble surfaces. 


All Preparation Equipment is an Australian owned and operated company, working with concrete, flooring and construction companies in the industry for over 15 years and has introduced this shroud from industry feedback. The key benefits this new dust shroud cover gives is, you have better view of the cutting zone, effective cooling of the diamond cutting blade while you work and works efficiently with a low power vacuum cleaning or dust extraction system.


Invest in the right shroud for your project requirements,

  • 4'' (100mm)


  • 5'' (125mm)


  • 7'' (175/180mm) / 9'' (230mm)


Consider your Vacuum dust extractor, 

When setting up with a new dust shroud cover for your angle grinder and hand held tools, it's worth considering the vacuum unit that you have connected for dust. Onsite contractors need a vacuum of at least a 35L capacity with an M class or H class requirement, depending on the style of work you do and the region where you are based. Workplace Health and Safety for your local state or region will be able to advise your specific equipment requirements. 

Dustcontrol Inc Manufacturers effecient vacuum and dust extraction solutions for construciton sites around the world. Their vacuums  run with a cyclone operation to help ensure the dust doesn't float around and clog up the filters working space and ensure maximum air flow at all times.The smallest of the Dustcontrol Inc. Vacuums is the DC1800 portable unit, a small compact portable system for any contractor that fits snug in the back of most utes, vans, or trailors for transport to and from site. 

Concrete vacuums from Dustcontrol range up to larger single phase units which run alongside a supa dust separator system and three phase vacuums to help control dust when running alongisde a larger three phase or remote controlled concrete floor grinder such as the Schwamborn. 

The time to act is NOW. 

Call our team on 1800 422 992 to discuss how you can control the concrete silica dust hazard onsite