Deep Seal Natural 20L
To seal untreated concrete, paving and masonry products with the view to providing long term protection from staining, without affecting natural texture or appearance.
HOW TO SPECIFY:
All exposed surfaces shall be treated by 2 coats of DeepSeal Natural ?W?. The application rate is determined by consultation with a representative of Know How Concrete Technologies. Most surfaces 1 Litre = 4,7 m2 per coat. All surfaces to be clean and dry and free of loose materials.
HOW TO USE PRODUCT:
Apply two light even coats of DeepSeal Natural ?W? to surface with a brush, roller, lambs wool applicator or low pressure spray. Allow drying between coats (approximately 20,30 minutes depending on ambient temperature).
Reduction in water uptake, water-vapour permeability, concrete corrosion; Resistance to alkalis and carbons; UV Resistance; Surface left unchanged; Lower maintenance efforts and costs.
All natural unpainted masonry, concrete and pressed clay surfaces.
All tools and equipment should be cleaned thoroughly with clean soapy water.