Dustcontrol DCF Mobile with Cyclone
The DCF Mobile cyclone has a high efficiency cyclone mounted in the top cover. Thanks to the small diameter of the cylinder in relation to its height and to the specially shaped inlet, this separator can separate even smaller and lighter materials. The separated material then falls into the container which is fitted with a plastic sack for dust-free handling
Why Use a Pre-Separator?
When large quantities of material are to be separated, it is advisable to use a pre-separator. The pre-separator can be placed at the work place or in conjunction with the central unit.
When a pre-separator is to be used the following should be considered:
- Type of dust to be handled.
- Where the unit should be placed and how emptying will be performed.
- Expected airflow.
Pre-separators can be used in all applications where the extracted material is coarse or voluminous. These can be placed in the actual workplace for separate handling or recovery of the extracted material, or centrally.
Pre-separators separate material from the air-flow using the action of a cyclone or with inertial separation. Inertial separators are generally configured as containers with the inlet and outlet in the same wall of the container. When the air-flow changes direction abruptly, separation occurs for the particles with higher relative mass. When pre-separation is used to accommodate higher material volumes it is also important to consider the type of material discharge to be used. All Preparation Equipment offers a range of different standard options including; screw compaction, airlocks or container collection. Contact one of the team on 1800 422 992 to discuss further.
|Container volume||95 l|
|Height||900 mm/1650 mm (with cyclone)|
|Container diameter||440 mm|
|Weight||30 kg/35 kg (with cyclone)|
|Inlet/Outlet||Ø 76 mm|
|Air Flow||100–500 m3/h|