Dustcontrol DCF3900L Robust Separator

VAC-DC703900

Dustcontrol Robust Separator DCF3900L (Longopac System)

$2,099.00$2,099.00

Dustcontrol DCF3900L Robust Separator 

  • High capacity, low weight
  • Dust-free bag replacement with longopac-bags
  • Approved quality and long working life
  • Adjustable chassis to facilitate the transport
  • Corrosion class C4 (ISO 12944) 

The DC F3900L is a robust preseperator for handling large quantities of dust, especally in the case of floor grinding. The chassis is adjustable to facilitate transport. Due to its large inlet the preseperator is also well suited to seperate coarse dirt. 
Because 90% of the dust is already seperated in the DC F3900L, the number of emptying trips is reduced considerably for the user. The DC F3900L can be connected to our dust extractors DC 1800 eco, DC 2900a/c eco and DC 3900a/c eco.

Features:

  • High capacity, low weight
  • Dust-free bag replacement with longopac-bags
  • Approved quality and long working life
  • Adjustable chassis to facilitate the transport
  • Corrosion class C4 (ISO 12944)

Why Use a Pre-Separator?

When large quantities of material are to be separated, it is advisable to use a pre-separator. The pre-separator can be placed at the work place or in conjunction with the central unit.

When a pre-separator is to be used the following should be considered:

  1. Type of dust to be handled.
  2. Where the unit should be placed and how emptying will be performed.
  3. Expected airflow.

Pre-separators can be used in all applications where the extracted material is coarse or voluminous. These can be placed in the actual workplace for separate handling or recovery of the extracted material, or centrally.
Pre-separators separate material from the air-flow using the action of a cyclone or with inertial separation. Inertial separators are generally configured as containers with the inlet and outlet in the same wall of the container. When the air-flow changes direction abruptly, separation occurs for the particles with higher relative mass. When pre-separation is used to accommodate higher material volumes it is also important to consider the type of material discharge to be used. All Preparation Equipment offers a range of different standard options including; screw compaction, airlocks or container collection. Contact one of the team on 1800 422 992 to discuss further.

 

 

HxWxL mm

1535 (1210)× 600× 775mm / 
60 (48)× 24 × 31 in.

Weight 25  kg  /55 lb
Inlet/Outlet Ø 50 mm /2 in.
Air Flow 180 - 320 m3/h // 106- 188  ft3/m
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.