Slurry safe 1L bottle

SlurrySafe AR 1 litre- Patented Synthetic Acid pH Control

SS-SAFE-1

SlurrySafe AR 1 litre- Patented Synthetic Acid pH Control

$22.50 +GST $22.50 +GST

SlurrySafe AR

Patented Synthetic Acid pH Control

Our SlurrySafe AR 1 litre with a Patented Synthetic Acid pH Control is a safe yet functional environmental replacement for traditional hydrochloric acid treatments and other commonly used acid treatments. It is a non-toxic, non-fuming and no VOC's substance that carries a triple Zero safety rating and is 100% biodegradable. It can be safely transported and holds an EPA "cleangredients" approval classification along with being safe on pumps, pipes and most metals.

 

SlurrySafe AR is a Patented Synthetic Safe

  • Acid Replacement for all Hydrochloric Uses
  • Triple Zero Hazardous Material Score
  • 100% Biodegradeable
  • Non Toxic, Non Fuming, No VOC’s
  • Non Regulated by US DOT
  • “Cleangredient” EPA Approved
  • Safe on Pumps, Pipes and most Metals
  • Descales and Eliminates Foulants and Rust
  • Requires No Corrosion Inhibitor
  • High pH Neutralizer
  • Acid Free 

 

A multi-purpose product

  • Grinding Aid
  • pH Reducer
  • Diamond Tool Cleaner
  • Equipment Cleaner
  • Descaler
  • Rust Remover
  • Slurry/Concrete Dissolver 

 

SlurrySAFE AR
High PH or Dirty Equipment
Replace Dangerous Acids

Typical Physical Properties
Appearance: Colourless to slightly yellow liquid
Initial Freeze Point: -31.6c (24.88f)
Odour: Odourless to mild soapy odour
Solubility in water: 100% Flashpoint, NONE
Specific gravity: 1.152. + or 0.04
Recommended dilution rate 30-100% with water
(blending ratios may vary based on specific
applications and recommmendations.)

Storage & Handling
Slurry safe has a storage life of better than one year. Keep container closed when not in use. Take care with storage. Safety glasses are suggested for use when handling. When pumping this product. t is strongly recommended to use manufacture approved hose couplings and fiittings. Avoid aluminum hose coupling and fittings. Avoid aluminum fittings. 316 stainless steel, polypropylene, polyethylene are recommended.

First Aid
INHALATION: Move to fresh air. Call a physician if symptoms develop or persist.
SKIN: Remove contaminated clothing. Wash exposed area with soap and water for at least 15 minutes. Launder clothes before reuse. Call a physician if rash or other symptoms develop.
EYE: Flush with water for at least 15 minutes while holding eyelids open. Call a physician if irritation persists. If worn, remove contacts after 5 minutes.
INGESTION: If ingested, may cause loose stools. Drink 2-3 glasses of water and immediately consul a physician. Do no induce vomiting.
Keep victim under observation.

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
$22.50