Flat Flexible Easy Squeegee Replacement Blade 650mm

Product Information

27"/ 650mm No Notch Flexible Light Grey Easy Squeegee Rubber

Just add the Frame - click here

• Gray / Non-Marking Rubber
• Chemical & Abrasion Resistant
• Flat Stiff Blade
• General Purpose Applications

The Easy Squeegee blades provides options to apply almost any coating from 4-60+ WFT Mils. The four unique styles (Flat Flexible, Flat Stiff, Scalloped Notched and V-Notched) provide the installer choices and options in field as to how to best accomplish the project. All blade packaging is colour coded for easy identification. 

Regardless of the task you need to complete, the Easy Squeegee can help you complete it with improved accuracy and efficiency. It will also help drive out costs by being truly cleanable and reusable. 

Not sure which Easy Squeegee is right for your job? Use the guide below to help. Otherwise call the team at All Prep for the best advice. 1800 422 992. 

- Do you prefer a thinner more flexible blade for your coating applications? Or do you prefer pulling vs pushing? Try a Flat Flexible

- Do you have a large area to coat with a thin film clear epoxy or urethane topcoat? Try a Flat Stiff

- Tasked with pulling a rapid curing polyaspartic urethane clear-coat over a random flake floor? Try a 5-7 WFT MILS

- Need to get 200 gallons of 100% solids metallic epoxy at 100 ft2/ GAL? Try a 8-12 MFT MILS

- Applying a decorative 100% solids metallic epoxy at 100 ft2 / GAL? Try a 15-20 WFT MILS

- Looking to squeegee apply 30 Mils (50 ft2/ GAL) of silicone roof coating? Try a 25-30WFT

- Are you applying 40 Mils of polyurethane deck coating to a large parking structure? Try a 40-45 WFT MILS

- Need to apply 60+ Mils of an epoxy waterproofing to a bridge deck? Try a 50-60 WFT MILS

Wet Film Spread Rates (WFSR FT2/GAL) are not absolute, but are provided to assist blade selection. Many factors can contribute to the actual WFSR including pressure exerted on the blade, porosity of the substrate being coated, material used, and if and how the back-roll is completed.