AquaDUSTER 162mm Water Collector for easy collection of slurry when drilling

Product Information

AquaDUSTER 162mm Water Collector for easy collection of slurry when drilling

• Firm Vacuum fixation to wall and floor surfaces 
• Water and sludge control and removal 
• Max Drilling diameter is 162mm 

Instructions

• Connect the vacuum cleaner to the vacuum cleaning exhaust collar of the dust-shroud device. 
• Turn on the vacuum cleaner and put the device on the processing surface. Make sure that the center of the device and the center of the future hole match together. 
• After work hold the dust shroud cover while turning off the vacuum cleaning setup. If running wet make use of Slurry DRY to control the slurry product and help it maintain as a solid rather than running down the wall if you don't have a vacuum or extraction source connected. This works exceptionally well on floor or flat surfaces as slurry dry can be added to the inside rim of the drill dust shroud helping it create a pool around the edge of the shroud.

Purpose

This device is developed for water and sludge removal from the drilling zone on vertical and horizontal concrete and brick surfaces. 

Max drilling diameter for use with this shroud is 162mm.

Safety requirements

Please follow general safety requirements for handheld angle grinders and power tools. Ensure you have the correct PPE equipment while using this equipment onsite. 

Control the dust, directly from its source. 

• Works even with LOW POWER Vacuum cleaning and extraction systems
• View of the drilling zone 
• Control dust from cutting and slurry from the wet drilling application

The best way to avoid dust while drilling is to use water exhauster AquaDUSTER 162.

It is connected to the vacuum cleaner and is suctioned to the drilling zone to remove the water and dust. It is simple, affordable, and effective

.